https://www.youtube.com/watch?v=LTwJzcFRMCE The extrusion temperature is usually between 400-600 ℃, and the extrusion temperature varies with different materials. The traditional heating method is resistance furnace heating, and the spindle is put into the furnace to slowly heat up through heat
What is steel billet hot rolling? Steel billet hot rolling is an application of induction heating technology. The main method of electromagnetic induction heating is to generate eddy currents inside the heated workpiece, and then rely on the heat
Mining cutting picks refer to cutters used by mining machinery to cut coal and rock, including flat picks, conical picks, radial picks, tangential picks, etc. All of them can be brazed or heated with high frequency induction brazing machine.
Induction welding is widely used in life, automobiles, air conditioners, aviation, nuclear industry, shipbuilding, construction, etc., especially in industry, are used the most, and with the development of China’s economy, welding technology has become an indispensable processing means.
https://www.youtube.com/watch?v=Id51e3qzv-c With the continuous progress of induction heating technology, the application of induction heating technology not only saves energy, improves work efficiency, and has low metal oxidation burnout rate, but also coincides with the environmental protection concept advocated by
At present, there are many types of grooved quenched parts, such as camshaft opening grooves, differential housings, etc. However, the quality of quenching of grooved parts has not been guaranteed, and quenching is also very difficult. In this paper,
https://www.youtube.com/watch?v=w3wKmfnNGs8 Parts can reflect the extent of induction hardening of an average car. Induction hardening of constant-speed links (sleeves and cylinders for front-drive sedans), axles and rear axle drive shafts has made remarkable progress, while the rapid development of
Summary As an important cooling component of new energy vehicles, microchannels are mainly used to cool the battery packs of new energy vehicles. The tube wall of the microchannel is relatively thin, and the thinnest is about 0.3mm. The
Get A Quote
