Induction welding brazing is a form of welding that uses electromagnetic induction to heat the workpiece. The welding apparatus contains an induction coil that is energized with a radio-frequency electric current. This generates a high-frequency electromagnetic field that acts
1. Automobile manufacturing industry Induction heat treatment technology has been most widely used in the automobile industry, and the induction heating quenching of automobile parts has risen to about 50% of all heat-treated parts.The purpose of induction quenching is not
Tempering after quenching is commonly used to increase the stiffness and toughness of steel, eliminate internal stress, improve dimensional stability and uniformity, but has little effect on the hardness of steel quenching. When hot steel is chilled, its microstructure changes
Problem: Irregular deformation of parts after induction heat treatment Solutions: 1. Check the quenching fluid concentration, flow rate, and pressure. 2. Ensure proper quenching uniformity. 3. Check the coaxiality of the spindle and the fixed fixture of the parts. 4.
Possible factors for surface hardness deviation The problem is that during the heating and quenching cycle, the heat treatment personnel notice that the surface hardness of the quench shaft changes significantly after the first induction quenching, whether the parts are
What is an induction heating machine? An induction heating machine is a device that uses an electromagnetic field to heat up metal objects without direct contact. Induction heating machines can be used for various purposes, such as surface hardening,
Intermediate frequency induction heat treatment line equipment introduction The secondary coil of an intermediate frequency quenching transformer is an AC induction coil. The workpiece is placed in an ac induction coil and heated by an alternating magnetic field. Intermediate frequency
Induction heat treatment is an energy-saving process, but the improper selection and application of induction heat treatment equipment and the process will make the equipment and process waste electric energy. Therefore, attention should be paid to the following: 1) Select
Get A Quote
